Google Plus   Facebook   Yelp
 Notary and Engineering Seals by State  :  Colorado Notary and Engineering Seals  :  Colorado Professional Engineering Stamps

Colorado Engineer and Land Surveyor Seal Requirements

Pursuant to Section 12-25-117(1), C.R.S., the seal authorized by the State Board of Licensure for Architects, Professional Engineers and Professional Land Surveyors for licensees is of the crimp type, rubber stamp type, and/or computer generated type. The seal shall be of a design and size shown below. The diameter of the outer circle shall be nominally 1 5/8 inches (41 mm) and the diameter of the inner circle shall be nominally 15/16 inches (24 mm). The license number assigned shall be centered in the inner area of the seal in the space occupied by the word "NUMBER" and the size of the numbers shall be the same size of the letters in the word "NUMBER". The word "NUMBER" should not appear on the seal.

Colorado Architect Seal Requirements

Pursuant to Section 12-25-307(1)(e) C.R.S>, each licensee shall procure a stamp, which shall be in the form of 2 concentric circles, the outer circle approximately 2 inches in diameter and inner circle approximately 1 1/4 inches diameter. The words "State of Colorado" and "Licensed Architect" shall appear between the concentric circles at the top and bottom respectively. The name of the licensee and the license number of the licensee shall appear within the inner circle. The stamp may be an embossing type, rubber stamp type, or electronically generated type and must be affixed directly to the reproduction drawings and specifications.

Colorado Landscape Architect Seal Requirements

Pursuant to Section 12-45-117(1), C.R.S., the seal authorized by the Board for licensees is of the crimp type, rubber stamp type, and/or computer generated type. Each licensee shall procure a stamp which shall be in the form of two concentric circles. The diameter of the outer circle shall be nominally 2 inches and the diameter of the inner circle shall be nominally 1 inch. The original date that the license number was issued shall be centered in the inner area of the seal in the space occupied by "mm/dd/yyyy" and the size of the numbers shall be the same size of the letters in "mm/dd/yyyy". The letters "mm/dd/yyyy" should not appear on the seal.

Order Your Professional Engineer Seal or other professional stamp

3 Easy Steps

First, Choose your Professional Seal from the selection below
Outline for the State of Colorado
STEP 1: Choose your designSTEP 2: Select your stampSTEP 3: Customize with your text
Colorado Landscape ArchitectColorado Licensed ArchitectColorado Professional EngineerColorado Land Surveyor
Custom Rubber Stamps
Love Stamp-Connection?
Google Plus   Facebook   Yelp
Contact Us --- Our Return Policy --- Our Privacy Policy --- Site Map
© 2016 Stamp-Connection - All Rights Reserved