|Notary and Engineering Seals by State : North Dakota Notary and Engineering Seals : North Dakota Professional Engineering Stamps|
North Dakota Licensed Architect and Landscape Architect Seal Requirements
At the time of the issuance of the certification of registration, the board shall require the certificate holder to acquire, at the certificate holder’s expense, a stamp or indicia to be used by the certificate holder in the conduct of the certificate holder’s practice and to be impressed upon drawings, plans, and other documents prepared by the certificate holder.
North Dakota Professional Engineer and Surveyor Seal Requirements
The seal authorized by the state board of registration for professional engineers and land surveyors for registrants is of the crimp type or rubber stamp, or electronic. Seals prepared after July 1, 2005, shall be of a design so the seal consists of two concentric circles with the diameter of the outer circle being one and three-fourth inches and the diameter of the inner circle being one and one-fourth inches. The upper portion between the two circles shall bear whichever of the following phrases is applicable to the registrant: “Registered Professional Engineer”, “Registered Professional Land Surveyor”, or “Registered Professional Engineer & Land Surveyor”. At the bottom of the annular space between the two circles shall appear the inscription “North Dakota”; the inner circle shall contain the name of the registrant, registration number, and the words “Date”. The registration number assigned should be centered in the inner area of the seal and the size of the numbers should not be larger than the registrant’s name.
Order Your Professional Seal or Stamp
3 Easy Steps
First, Choose your Professional Seal from the selection below
|STEP 1: Choose your design||STEP 2: Select your stamp||STEP 3: Customize with your text|